[solved]Archlinux installation problem

[sakthibruce]

Try to install arclinux 2014.03.01 dual on my dual booted (windows/mint) system by using usb(followed dd command and usb image writer from mint and other windows based softs ) facing this problem 


Note: downloaded twice from http and torrent but face the same problem.

Sorry for my bad english.

Any solution ?!

[Rytiou]

Strange, I've never seen an error like this before. Anyways I did a quick search and found this article listed below so try and see if that fixes your error. If not I'd ask on the official arch linux forums. Hope this helped you out somewhat 

http://paulphilippov.com/articles/how-to-fix-device-not-accepting-address-error

[sakthibruce]

Strange, I've never seen an error like this before. Anyways I did a quick search and found this article listed below so try and see if that fixes your error. If not I'd ask on the official arch linux forums. Hope this helped you out somewhat

First of all Thanks for the reply and your care and Sorry for the late reply . Well the above method haven't solve my problem . I guess the solution is for already installed machine not for the system going to be installed btw I can access the pendrive in Linuxmint

[Rytiou]

First of all Thanks for the reply and your care and Sorry for the late reply . Well the above method haven't solve my problem . I guess the solution is for already installed machine not for the system going to be installed btw I can access the pendrive in Linuxmint

Well if installing from a usb won't work try burning the image to a cd and see if you have any luck with that.

[sakthibruce]

Well if installing from a usb won't work try burning the image to a cd and see if you have any luck with that.

I dont have CDROM mate 

[lucid]

You said you used dd on Mint? What was the exact command that you ran?

[sakthibruce]

You said you used dd on Mint? What was the exact command that you ran?

# dd bs=4M if=/path/to/archlinux.iso of=/dev/sdx && sync

[lucid]

Hmm. You could try doing it with just the very basic syntax.

Code: [Select]

dd if=/path/to of=/dev/sdx

dd can be sensitive. This has never failed to work for me.

[sakthibruce]

Hmm. You could try doing it with just the very basic syntax.

Code: [Select]

dd if=/path/to of=/dev/sdx

dd can be sensitive. This has never failed to work for me.

Let u know after trying. Thanks 

No use mate, Same problem. I tried to run it from the cd rom by the help of my friend also unplugging all the usb devices still shows the same problem.

In

Code: [Select]

root@archiso ~ #           Typing "lvs" shows no 'No volume groups found'

[proxx]

Looks like either your USB media is dead or there is a driver issue.
Can you provide the output of dmesg ?
In certain cases I know a USB3.0 port fails due to some driver related issues.

[sakthibruce]

Can you provide the output of dmesg ?

Here I attached my dmesg output

[proxx]

You tried enabling IOMMU  in the bios ?
Also is this a new system , as in UEFI/modern board ?

[sakthibruce]

You tried enabling IOMMU  in the bios ?
Also is this a new system , as in UEFI/modern board ?

Well disabling USB ports in bios lead to archiso login page without any error. I thought "archiso login: root (automatic login)" is a error, later I realized arch changed their installation method from the blue screen(http://qandasys.info/arch-linux-installation-on-vmware-will-not-proceed/#comments) . Sorry for the trouble I caused to you guys  . Thanks a lot for helping me specially "proxx", "lucid", "rytiou"