Show Posts
1
Operating System / installed fedora 16 and windows crashed
« on: May 11, 2012, 02:42:36 PM »I have HP dv6 pavilion. I installed fedora 16 in it along with windows. I installed fedora on a separate partition. After installation I booted to windows, but it crashed. It shows a "starting windows screen" and then crashes with a blue screen. On next time of starting windows, it shows a recovery environment, with a message that the "device you wanted to connect was not available". I tried to boot with a windows CD to reinstall windows and remove fedora, but it isn't able to locate hard disk driver and hence of no good at all. In nutshell windows is cannot be restored by fresh installation.
As far as I read on internet and experience, its a problem with configuring grub. my fdisk -l output look like:
Code: [Select]
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xad6d2636
Device Boot Start End Blocks Id System
/dev/sda1 63 2047 992+ 42 SFS
/dev/sda2 2048 409599 203776 42 SFS
/dev/sda3 * 409600 995420159 497505280 42 SFS
/dev/sda4 995420160 1250263727 127421784 5 Extended
/dev/sda5 995422208 996446207 512000 83 Linux
/dev/sda6 996448256 1250263039 126907392 8e Linux LVM
Disk /dev/mapper/vg_vikaspc-lv_swap: 8355 MB, 8355053568 bytes
255 heads, 63 sectors/track, 1015 cylinders, total 16318464 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_vikaspc-lv_swap doesn't contain a valid partition table
Disk /dev/mapper/vg_vikaspc-lv_root: 53.7 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders, total 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_vikaspc-lv_root doesn't contain a valid partition table
Disk /dev/mapper/vg_vikaspc-lv_home: 67.9 GB, 67880615936 bytes
255 heads, 63 sectors/track, 8252 cylinders, total 132579328 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_vikaspc-lv_home doesn't contain a valid partition table
[size=78%]If anybody have faced this problem or have an idea how to fix it, your help will be appreciated.
/boot/grub2/grub.cfg file looks like:
[/size]
Code: [Select]
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
set timeout=5
### END /etc/grub.d/00_header ###[size=78%]My /etc/grub2.cfg file have the menu entries:
[/size]
Code: [Select]
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Fedora (3.3.4-3.fc16.x86_64)' --class fedora --class gnu-linux --class gnu --class os {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3cf7895c-b625-4a20-be2e-aee4192fcf1f
echo 'Loading Fedora (3.3.4-3.fc16.x86_64)'
linux /vmlinuz-3.3.4-3.fc16.x86_64 root=/dev/mapper/vg_vikaspc-lv_root ro rd.md=0 rd.dm=0 KEYTABLE=us quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 LANG=en_US.UTF-8 rd.lvm.lv=vg_vikaspc/lv_swap rd.lvm.lv=vg_vikaspc/lv_root
echo 'Loading initial ramdisk ...'
initrd /initramfs-3.3.4-3.fc16.x86_64.img
}
menuentry 'Fedora Linux, with Linux 3.1.0-7.fc16.x86_64' --class fedora --class gnu-linux --class gnu --class os {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3cf7895c-b625-4a20-be2e-aee4192fcf1f
echo 'Loading Linux 3.1.0-7.fc16.x86_64 ...'
linux /vmlinuz-3.1.0-7.fc16.x86_64 root=/dev/mapper/vg_vikaspc-lv_root ro rd.md=0 rd.dm=0 KEYTABLE=us quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 LANG=en_US.UTF-8 rd.lvm.lv=vg_vikaspc/lv_swap rd.lvm.lv=vg_vikaspc/lv_root
echo 'Loading initial ramdisk ...'
initrd /initramfs-3.1.0-7.fc16.x86_64.img
}
menuentry 'Fedora Linux, with Linux 3.1.0-7.fc16.x86_64 (recovery mode)' --class fedora --class gnu-linux --class gnu --class os {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3cf7895c-b625-4a20-be2e-aee4192fcf1f
echo 'Loading Linux 3.1.0-7.fc16.x86_64 ...'
linux /vmlinuz-3.1.0-7.fc16.x86_64 root=/dev/mapper/vg_vikaspc-lv_root ro single rd.md=0 rd.dm=0 KEYTABLE=us quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 LANG=en_US.UTF-8 rd.lvm.lv=vg_vikaspc/lv_swap rd.lvm.lv=vg_vikaspc/lv_root
echo 'Loading initial ramdisk ...'
initrd /initramfs-3.1.0-7.fc16.x86_64.img
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root BE5EC8485EC7F6E5
chainloader +1
}
menuentry "Windows Recovery Environment (loader) (on /dev/sda3)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set=root A43ADDF33ADDC30A
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/90_persistent ###
### END /etc/grub.d/90_persistent ###[size=78%]After some help, it seems the probable cause is SFS filesystem for the main windows drive. Help on how to convert sfs to ntfs in best possible way without loosing data will be appreciated.
[/size]